Hamilton Beach Blender Won’t Turn On? 5 Reasons and 9 Solutions!

Hamilton Beach Blender Wont Turn On
( Disclaimer: As an Amazon Associate, we earn commissions from qualifying purchases at NO additional cost to the customer.)                                          

Nothing is more frustrating than when your gadget breaks when you need it.

This is a common experience for everyone.

After you press the start button on your blender to start blending a favorite meal or drink, you are confronted with deafening silence?

What do you do?

We will explain in this article why a blender from Hamilton Beach won’t turn on and how to fix it.

Hamilton Beach Blender may not turning on because you don’t properly plugged in the blender to the power source or if there is no power setting selected.

It also happen because of excessive heating of the blender or blender jar not positioned properly. 

Overfilling the pitcher also cause to blender wont turn on.

Are you interested to get into detail? Continue reading.

Can’t Turn on Hamilton Beach Blender: Why?

Various reasons may cause your Hamilton Beach Blender not to turn on.

The following are just a few of them:

Hamilton Beach Blender not properly plugged in

You must plug in the Hamilton Beach blender properly.

Make sure you’ve plugged the switch into a functioning outlet.

If not, the blender will not turn on.

So, if your Hamilton Beach blender is not turning on, check if it is properly plugged in.

No power setting has been selected

Settings are crucial when it comes to kitchen appliances.

Make sure you read through the whole user manual once you receive your Hamilton Beach blender.

Check to make sure you understand all of the options.

Perhaps you are choosing the wrong power setting.

It could be this issue that prevents the blender from turning on.

Excessive heating

Two things can happen when you use your Hamilton Beach Blender.

The blender may not turn on, or it may turn on.

Alternatively, it may start and shut down mid-process.

When this occurs, the machine is likely overheating.

The thermal fuse automatically activates when the machine is overheating.

Once the thermal fuse has been engaged, the machine will not run.

This is because the blender machine needs time to cool down.

If you wait an hour or two, the blender will begin working automatically on its own.

Blender jar not properly positioned

It is important to place the blending jar at the base correctly.

A misplaced jar will prevent the blender from turning on.

As a precautionary measure, this is also designed to protect consumers.

The machine will automatically turn on when all of the safety components are in the proper place.

Excessive filling the pitcher

Unless none of the foregoing are causing the problem, take a close look at your pitcher.

Hamilton Beach blenders are designed to handle a specific amount of food at a time.

You can usually tell when you’ve added too much by looking at the line near the top of the blender jar.

The blades should also have some space to move about in, something the user manual guide doesn’t tell you.

Therefore, overfilling your blender jar with food items would result in your Hamilton Beach blender not turning on.

What to Do If Your Hamilton Beach Blender Won’t Turn On?

Several reasons could be causing your Hamilton Beach blender to stop working properly or completely. There’s nothing to worry about.

As we described the reasons earlier, loose connections are the most common reason it doesn’t always work.

Thus, before you go out and purchase a new one or get an expert to repair it, perform some simple tasks yourself.

It’s up to you now to decide how you’ll proceed.

It would help if you got started with the work to help you troubleshoot your Hamilton Beach blender.

How to Fix the Hamilton Beach Blender not Turning On?

Several reasons may be affecting your blender’s ability to turn on, as we mentioned above.

Throughout this section, we’ll walk you through each logic and show you how to resolve issues when your blender won’t work.

Plugged in the blender properly to a power source

This is a very common occurrence that you may not be aware of.

Did you ever notice that something had become unplugged while you were trying to use it?

Be sure the power cord is properly connected to the electrical outlet before exploring other possibilities.

Replace the motor

You may suffer a motor failure with your Hamilton Beach blender, which is the worst possible outcome.

If you can do the work yourself, you can replace the motor, although it may require soldering.

Turn over the blender after unplugging it.

Take off the lid to reveal the motor.

A detailed description of disconnecting and replacing it can be found in the owner’s manual.

The best option is to hire a repairer.

Replace the device entirely may be more cost-effective, depending on the Hamilton Beach blender model you have.

Consider checking out some of the other possibilities on our list of typical blender problems before disassembling it completely.

Check the circuit breaker for that outlet has tripped

Check your breaker box once you have double-checked that your blender is connected.

Your circuits may have been overloaded since the last time you used this outlet.

It would help if you labeled each breaker in your breaker box.

Check for any that mention “kitchen” to see if they’ve been tripped.

It is simply a matter of flipping it back in this case, and the problem will be solved.

Having this problem might indicate that you’re overloading the circuit or that there’s a problem with the breaker.

Check this out with a competent electrician to prevent any hazards.

Replace the power cord

Check that the power cord works properly.

In kinked situations, the wires inside the protective cord sleeve can break.

To determine if this is the problem, look for obvious bends or folds in the cord. Seeing kinks could be a sign the cord is at fault.

For more information, check your blender’s owner’s manual.

Replace the old cord with the new one by reinstalling the cord inside the base. Soldering may be necessary in some cases, but your owner’s manual should tell you if this is necessary.

Inspect the fuse

Several Hamilton Beach blender models contain internal fuses.

If you damage or burn out a fuse in your blender, it will not start.

Typically, the fuse is hidden inside the bottom base.

Check the fuse on the base according to your owner’s manual.

It is easy and affordable to replace fuse boxes for blenders.

By simply looking at the fuse, you can tell if it is damaged or not.

To determine if there is electrical continuity, use a multimeter.

It is recommended to replace a blown fuse if the circuit is open.

Replace the damaged fuse with one that is of the same rating.

Check or replace the base

Any damage to the base of your blender will prevent it from turning on.

The base of your blender is also known as the collar.

Your manual guide will provide more information.

In some models, a micro or magnetic safety switch requires the base to be properly positioned before operation.

Although the base is installed properly, it could be defective.

By contacting the brand’s maker, you can change this base cheap item.

Eliminate blockage of blades

You can only blend so much with your blender’s blades.

Additionally, some gunk can build up if you do not carefully clean your blender after each use, preventing the blades from turning.

Clean the blades or the case that holds the blades carefully and thoroughly. Reassemble the blender, plug it in, and test it again.

Replace the blade

Be cautious that stuck blades can cause your motor to overwork.

As a result, the motor may burn out, or the internal fuse may burst.

Always clean your blender thoroughly after each use.

You can also replace the blade for better performance.

They won’t process properly if you put too much pressure on the blades.

Clean the terminals covered in dirt

It is important to clean the power terminals of the blender if corrosive materials have gotten past the protective plate.

You can examine the terminals on the blender by removing the plate behind the buttons.

When they have built up any substance, clean them with an approved cleaner.

Put the plate back where it belongs, reconnect the blender, and press a setting button.

If your blender works, the problem is solved.

Safety Features of a Hamilton Beach Blender

You can maintain your Hamilton Beach blender for proper use by keeping it in good shape with the following safety features.

  • It is important to avoid submerging the base in water since it houses all electrical components.
  • It is not necessary to fill the blender jar to the brim. Making a mess is not something you want to do.
  • Use extreme caution when handling the blades. When hand-washing, be very careful. Failure to do so could result in an injury.
  • Maintain a dry, clean base. To clean the base, use a wet rag.
  • Please keep your fingers away from the jar when it’s in use.
  • You should set it down on a flat, dry, and stable surface.
  • It is not safe to use the jar to blend hot liquids. If you plan to use a hot liquid, make sure the jar can withstand the heat.
  • Whenever you are performing maintenance or repairs, unplug it first.
  • Make sure you know the capabilities of your unit before using anything abrasive, such as ice.
  • You should read the manufacturer’s user manual before starting to use it.
  • It would help if you watched it closely while it blends.
  • Finally, make sure you always clean it after each use.

The Takeaway

Hamilton Beach blenders do not turn on for several reasons, many of which can be resolved quickly.

Depending on which Hamilton Beach blender you have, a replacement may be more appropriate than a repair.

Hope this article helped gain insights into why your Hamilton Beach blender won’t turn on and how to fix it.




Related Articles:

Hamilton Beach Blender Leaking?

Hamilton Beach Blender Blade won’t Spin?

Breville Blender Wont Turn On?