Which Way is Colder on a Whirlpool Fridge?

Which is the colder way of Whirlpool refrigerator
( Disclaimer: As an Amazon Associate, we earn commissions from qualifying purchases at NO additional cost to the customer.)                                          

Which way is colder on a Whirlpool fridge?

Ever had this thought as a child about what the knob inside your Whirlpool refrigerator could be used for?

The use of this knob is for no reason but to control the refrigerator’s internal temperature.

Usually, the knob reads options from 1 to 5 or even 7 in some refrigerators.

When you buy the refrigerator from the store, it comes in at an optimum temperature of 3-4.

This pointer is set to provide a temperature of around 37-40 degrees Fahrenheit.

While it is colder than room temperature, it is still not cold enough.

This knob has a setting ranging from 1 to 5 or 7.

In the Whirlpool Refrigerator, 1 in the setting is the coldest, while 5 or 7 are the hottest depending on the last number option on the knob.

These knobs ranged from 1-7, with one being coldest and seven being hottest.

Caught an interest yet?

It is high time to join this jolly ride and read on till the end.

Is Your Whirlpool Refrigerator on the Right Temperature?

Most often, Whirlpool refrigerators come with a knob to control the temperature of the fridge.

Suppose there is no knob anymore, no need to fret.

Refrigerators have come a long way from being a simple man-made device to being an evolutionary tool that helps more than simply preserving food.

Nowadays, you will find an LED display with touch screens on the door of the refrigerator.

You can control the refrigerator setting from there.

It extends from various temperature ranges that differ from the peak temperature to the lowest point by many degrees.

The best temperature that a Whirlpool refrigerator could be is around lower than 40 degrees Fahrenheit.

If you buy the fridge from the store, this would be the factory temperature or the temperature set in after it is a finished product.

Typically, you could find this out from the LED indicator attached to the front of the door.

However, if any of the indicators is malfunctioning, you could use other methods to check the temperature provided by the refrigerator manually and see whether it is optimal.

First, take some water from the refrigerator.

If there are none, fill a cup of water and keep it in the refrigerator for about four to six hours.

Lastly, use a thermometer to measure the temperature of the water.

It is better to use a digital thermometer with greater sensitivity and finer calibrations.

If the thermometer shows results below 40 degrees Fahrenheit, it is ok.

If it isn’t, you need to understand that there is something wrong with the temperature—this needs to change quickly since food tends to spoil faster at temperatures above 40 degrees Fahrenheit.  

Which Way is Colder on a Whirlpool Fridge?

Before we move on to digital refrigerators, let’s make things about old refrigerators that came with knobs.

This knob has a setting ranging from 1 to 5 or 7.

The 1 in the setting is the coldest, while 5 or 7 are the hottest depending on the last number option on the knob.

This knob uses a thermostat or thermal resistor to control the internal temperature.

If you turn the knob to the lower numbers, that is anti-clockwise, the thermostat allows more electricity to flow so that more energy is spent on creating a cooler temperature.

If you turn the knob to the higher numbers, that is, clockwise, the flow of electricity is restricted.

It causes the temperature to rise depending on the room temperature that the refrigerator is exposed to.   

In case your refrigerator is a smart one, it would be even easier to control the temperature.

Since all you need to do is change the temperature using your mobile phone app or use a voice command if this feature is available.

If the refrigerator uses digital LED displays, press the “temp” button for three to five seconds, depending on what your manual tells you to do.

After the refrigerator enters the adjustable state, you can decrease the temperature to the lowest point.   

All refrigerator types use the exact thermostat mechanism to change the internal temperatures depending on your preference.

The lowest temperature that Whirlpool refrigerators can turn to depends on the amount of energy and their capacity.

Usually, it could be 8-10 degrees lower than 0 degrees Fahrenheit.

What is the Coldest Temperature of a Refrigerator: 1 or 7?

In older generation refrigerators, you will find a knob or rotating wheel with which you can control the refrigerator’s internal temperature.

Most people in their childhood will have an experience of playing with them at least once.

These knobs ranged from 1-7, with one being coldest and seven being hottest.

If you wanted to set the refrigerator to a colder option, all you had to do was turn the knob anti-clockwise, where there was a lower number reading.

For greater internal temperatures, the opposite was applicable.

When Should You Adjust Your Whirlpool Fridge Temp?

You must get the refrigerator’s temperature to the correct point so that the temperature isn’t too high for the food to spoil, nor too high for the food or the moisture inside to freeze.

What matters is the correct optimum temperature, where you will get your food to be as cold as you like.

Airborne germs are a fundamental issue, mainly when you eat food after storing them for a few minutes.

If the refrigerator is above 40 degrees Fahrenheit, the bacteria growth is stimulated throughout the food.

These bacteria typically include disastrous strains of E. coli or salmonella.

If you are lucky, you might only feel a slight stomach ache. If you aren’t, you might as well die.

That is why, if you are going to eat leftover food, you should make sure that it has been left to refrigerate for at least 2-3 hours beforehand so that the bacteria growth is stopped.

However, a temperature that is too low is also an issue. Foods are used to give us energy through calories.

If they are stored in a very cold place, the food loses its energy in moisture and hardens.

An optimal temperature, not too high or too low, must be used to avoid such circumstances that make the food unhealthy or unpalatable.      

How Do You Change the Whirlpool Fridge Temperature?

How you will change your temperature depends on the type of refrigerator that you are using.

Older generations made use of a knob with ranges embedded in them that differ from 1 to 7.

You turn to the lower numbers for the cooling effect and higher numbers for greater heat temperatures.

Nowadays, refrigerators make use of digital touch screens or buttoned LED screens.

You can change the temperature directly from these screens without any need to control numbers that represent a vague temperature.

You can also use your phone to adjust the temperature setting or use a voice command if the feature existed in that particular model for smart refrigerators.

These refrigerators used thermostat mechanisms to control the refrigerator’s internal temperature, irrespective of the external conditions present at that time.

The main trick is to change the temperature to a more optimum ground so that food neither roots nor freezes.

How Do I Make My Whirlpool Fridge Colder?   

Typically, Whirlpool refrigerators are already cool enough not to need any external modifications for further cooling.

However, in case that it is not cool enough, you need to check a few things to make sure that the refrigerator is not malfunctioning.

1.Check if there is any frost buildup.

If your refrigerator is already very cold, there might be a case that the low temperature has caused the moisture in the air to freeze.

The frost tends to cover the vent and cover the airflow.

In such cases, you are supposed to clear the frost by scratching them off using a metal scratcher or turning the refrigerator off so that the ice melts slowly.

You could also use a purifier to cover the problem up.

2. The thermostat is not strong enough.

If you think that your thermostat can not give the correct temperatures, you could buy a stronger thermostat with more significant speculation and replace the old one with the new one.

If you are unsure about this, you could hire a specialist to install the new thermostat instead of the old one.

In addition to the ones mentioned above, you could also check whether the refrigerator door can close appropriately so that the cold air stays inside.

Cleaning the entire refrigerator is also a good option and a good practice that will help the Whirlpool refrigerator turn cooler than it usually is.

Final Thoughts

Knowing a bit more about the temperature setting in your whirlpool refrigerator can help you keep your food and drinks at the right temperature.

If you’re feeling technical, you are more than welcome to play around with the settings.

However, we hope that this article helped you figure out how to adjust the temperature to your liking. 




Related Articles:

Whirlpool Refrigerator Water Tastes Bad?

Whirlpool Refrigerator Says Cooling Off?

How Long Do Whirlpool Refrigerators Last?

How Many Watts Does Whirlpool Refrigerator Use?

Whirlpool Refrigerator Makes Clicking Noise?

Whirlpool PO Error Code?: Causes and Solutions

Whirlpool LED Light Flickering?

Whirlpool Gladiator Refrigerator Problems