One of the harsher realities of life is that your appliances will stop functioning in the hour you need them the most.
You know this. We all know this.
You’re preparing your favorite smoothie or drink one minute, and the next, you are met with pin-drop silence even though the start button has been pressed.
So what to do when your Black and Decker blender not working?
There are various reasons behind occurring this issue such as the appliance not being plugged in, tripped circuit breaker, motor burn out, bad power cord, jammed blades.
Your Black and Decker blender also wont work if the Intelligent system tripped the blender system.
Keep reading to find out the best ways to troubleshoot and fix the issues.
Is Black Decker a Good Brand Blender?
Yes, of course, Black and Decker blender is a good brand blender.
Black and Decker is a much popular brand when it comes to blenders.
The Black and Decker blenders are powerful, durable, and can process your ingredients efficiently.
This brand is specialized in manufacturing budget blenders for cost-conscious buyers who don’t go for a high-end model.
Their blenders are perfect for people who use their blender occasionally for making soups, sauces, salad dressings, and, smoothies.
If you’re new to the blending, an affordable BLACK+DECKER model may be a better choice than going for a pricier alternative.
BLACK+DECKER Blenders come in various sizes.
Their Personal blenders for making single servings include containers in 18- to 20-ounce sizes.
BLACK+DECKER also offers full-size, multi-serving blenders with large capacities that range from 48 to 72 ounces.
However, for making smoothies for the whole family, you can purchase additional personal-size jars.
Instead, you can buy a bigger Black and Decker XL Blast model to make several servings.
The higher wattage blender is the more powerful the blender.
In the BLACK+DECKER offers motor power varies from 275 to 900 watts.
If you are looking for a blender for processing ice and frozen ingredients, then higher wattage ratings are crucial.
Low-cost Black and Decker blenders are not designed to run at high power for a long period of time.
So, to avoid overloading the motor you can use the pulse setting when blending heavy-duty ingredients.
BLACK+DECKER blender containers are durable as they are made of either heavy-duty BPA-free plastic or glass.
Many BLACK+DECKER blenders come up with Perfect Pour jars that allow users to dole out drink servings without spilling.
Black and Decker come up with a modern style that appeals to a large number of folks.
Why Is My Black and Decker Blender Not Working?
Let’s go over some of the reasons a Black and decker blender might stop working:
The Intelligent System Tripped the System
Intelligent system power the Black and Decker blender.
It shuts off the gadget automatically after two minutes for speeds 1-18, and the CRUSH and PULSE function after 20 seconds.
If this happens, the LED display will show “EE.”
If this happens, disconnect the entire system and wait for 30 seconds.
The Appliance Hasn’t Been Plugged In
Unfortunately, this reason is more common than we would like to admit.
There’s no shame in admitting that we have all tried to use an appliance once only to realize that we forgot to plug it in or that the connection somehow came loose.
Before you look into any other reasons listed below, confirm the power cord is indeed plugged into a functional electrical outlet.
The Circuit Breaker Has Been Tripped
Now that your blender has been plugged in make sure to look at the breaker box.
Chances are, the circuits may have been overloaded at one point.
Every breaker should be clearly labeled on your breaker box.
Look for the one labeled “kitchen” and whether it has been tripped or not.
If the breaker has been tripped, flip it back.
If the issue persists, it could imply that the circuit is overloaded regularly and/or there is a problem with the wire or breaker itself.
Get it checked by a licensed electrician.
The Motor Burned Out
Perhaps the worst thing that can happen to your Black and Decker blender is burning out the motor.
A motor replacement can be done at home, but it will require a bit of soldering.
The process is complex, and we recommend you have a repair-person address the issue.
Based on the blender’s model, replacing the appliance totally can be more cost-effective.
Bad Power Cord
Have a look at the power cord.
Occasionally, cords kept in kinked states have the wires inside the sleeve break’s protective cord.
It is easy to know if this is the case by checking the cord of major folds or bends.
If the kinks are easy to spot, then the culprit may be the cord.
Check the blender’s owner’s manual.
With a few simple steps, you should be able to take out the cord from inside the base and change it.
Sometimes, soldering will be required, but you will know for sure once you see the owner’s manual.
Jammed Blades
A blender’s blades can only handle so much.
So it goes without saying that you have to clean the blender’s blades after every use.
There may be gunk buildup on the blades if you don’t, stopping them from turning properly.
Disassemble the base assembly holding the blade assembly and the blender’s pitcher.
Check for any buildup inside the casing or around the blades and if there is any, remove it thoroughly.
Next, reassemble the blender, plug it in, and try using it once more.
Note that jammed blades can be the reason behind motor overworking.
As a result, the motor burns out, or an internal fuse blows up.
Thoroughly clean the blender after each use and try not to overload the blades.
Black And Decker Blender Not Working?- Solutions
Power Supply
Let’s start with the basics.
An inconsistent power supply or a bad socket are the primary reasons a blender may not work.
However, a power supply shortage can also be caused by damaged cords.
To start, check to make sure your Black and Decker blender is connected to a consistent power source.
Next, inspect the switchboard and make sure it is functional.
If the blender is still static, you might want to check the power cord.
Can you see any signs of damage or unraveling?
If yes, take out the power cord immediately; there’s a serious chance of electrocution.
Moreover, the blender can short out.
It’s best to bring the blender to an electrician and ask them to replace the power cord.
A problem like this can lead to electrical fires and other hazards.
Overheating
Like any mechanical equipment, a Black and Decker blender heats up when used continuously.
Use the blender with small pauses to allow the motor to cool down – this way.
It doesn’t overheat.
Overheating for prolonged periods can result in irreversible damages to the motor.
The blender, however, does come with an in-built failsafe that turns the motor off once it has been operating for a specific period.
So give the machine brief breaks in between blending assignments – the motor needs rest too!
Ask yourself: Did your blender suddenly stop in the middle of a process?
If yes, you can confirm that the reason is overheating.
Thanks to the automatic turn-off switch in your Black and Decker blender, it will shut down the unit when the internal temperature shoots up too much.
In this case, let it rest and cool down a second, and avoid starting the machine until it has fully cooled down.
Safety Switch
Safety switches stop the blender from activating altogether.
But, if the safety switch is stuck, the blender will not start at all.
Look for the safety switch and once you have located it, check to see if it’s turned on or off.
In case the switch is activated, an issue must be stopping the completion of the circuit.
Remove the hindrance and activate the Black and Decker blender again.
This is not something most people can DIY on their own, so we suggest bringing your blender to a professional repair shop.
Check the Fuse
If the fuse is burnt or unserviceable, the blender will not turn off.
You have to make sure the fuse is good.
Usually, it can be found on the circuit board near the power cable connection.
So, the cover of the base has to be opened to test the fuse.
A step-by-step guide is given below:
- Open the base’s cover using the right tools.
- Use a multimeter to test the fuse.
Place the two probes of the multimeter on the two sides of the fuse and check the reading.
The fuse is open if the multimeter gives a high reading.
In contrast, the reading will be close to zero or zero if the fuse is serviceable.
- If the fuse isn’t working anymore, make sure to replace it.
But before that, you have to ensure that the replacement fuse is the same value as the last one.
Clean the Base
Most people would start with the base when a problem arises with the machine.
The base is where all the electrical parts are stored – the switches and the controlling knobs.
If the base is damaged and unable to activate the switch, you may need to replace it with new one.
Fortunately, this process is relatively easy.
Unscrew the blades and place them into a replacement one.
A switch or knob might stop working properly due to dust accumulation.
Thus, keeping the base clean is important.
Check the Motor
Generally, a blender’s motor has a long service life if you correctly use the device.
However, if the motor stops working too early, you can check it with a multimeter.
For that, unplug the unit from the power source.
Then, clip the meter’s probes to the plug prongs and wait for the reading.
If you get a low reading, the motor is supposedly okay.
If you get an infinite reading, on the other hand, the motor has gone bad.
In such cases, it’s best to replace the entire blender rather than spend money on repairing it.
Caution While Using Black And Decker Blender To Minimize the Issue
1.You should not place the blending jar on base when the blender motor is running.
2. Make sure the blending jar is totally dry when making bread crumbs, chopping nuts, or grinding coffee beans.
Do not run the blender for longer than 30 seconds.
3. Begin blending the ingredients at the lowest speed and then increase to a higher speed, if it is required.
4. If you want to stop blending, press the OFF button at any time during blending.
5. Do not blend hot foods/liquids in your Black Decker blender.
6. Black and Decker don’t recommend processing hard foods such as raw turnips, bones, hard salami or sausages, and boiling liquids.
7. Do not overfill your Black and Decker blender.
8. Don’t store foods in the blender jar.
Final Thoughts
You can either replace the parts of a faulty blender or invest in a new one.
It’s best to decide that by model years.
No matter what kind of blender you use, the owner’s manual will always have answers regarding troubleshooting.
Resources:
https://www.ifixit.com/Wiki/Black_and_Decker_BL3000S_Troubleshooting
https://www.fixya.com/support/t16205063-black_decker_bl2500s_blender_stopped
Related Articles: