Single-Serve Blender

Is Your Magic Bullet Blender Making Loud Noise? Here’s How You Can Fix It!

Magic Bullet Blender Making Loud Noise
( Disclaimer: As an Amazon Associate, we earn commissions from qualifying purchases at NO additional cost to the customer.)                                          

Efficient blenders like the Magic Bullet are useful appliances for the kitchen.

They can make silky-smooth soups, prepare the ideal morning smoothies, and whip fresh homemade nut butter, among other things.

As amazing as they are, these devices have one little drawback: they are quite noisy.

If your Magic Bullet Blender making a loud noise, it could be because of worn-out motor bearings or maybe a broken base.

Whether the culprit is a blunt blade or a loose coupler, you need to fix it immediately.

So, if you have a Magic Bullet blender making loud noise we come up with causes and fixes for the problem that might help you get rid of it.

Why Your Magic Bullet Noise is Making Noise?

Blenders are far more complex and carefully designed equipment than most people assume.

A heavy electric motor and bearings, gears, couplings, and fans are all found within a blender.

When you switch on your blender, all of these pieces, as well as the blades and anything you’ve placed into the blender pitcher, are set in motion, causing a lot of shaking.

If your Magic Bullet blender is making loud noise then it is the result of vibration.

Blenders are loud and disruptive since you have a big group of tiny components running at fast speeds and under heavy pressures.

Worn out blades

Since the bearings or bushings inside the blade arrangement have started to wear, the blades can move too openly and become loud, causing your blender to smash or squeal.

Chopper kits, blending components, and agitator assemblies are all terms used to describe blades.

In today’s blenders, steel blades are rather prevalent. Steel, on the other hand, is very abrasive.

Blender makers have done a great deal to offset this by using softer and lengthier blades rather than steel in their blenders.

The back-and-forth action of the blades, on the other hand, is eerily similar to grinding.

This pulverizes everything within your blender, particularly the motor.

Whatever you’re producing in your Magic Bullet blender, it’ll need to be left on for the same length of time for each use.

With the engine working at high rates, this implies you’ll have a lot of mixing time.

The blades are also utilized with the same level of power to grind even the toughest substances into a powdery form.

They’re whirling so rapidly and exerting so much energy that everything within your blender is being crushed.

Faulty Motor

Your blender’s motor bearings may be worn, resulting in a crushing or screeching noise.

It’s rare to be able to replace only the bearings, therefore you may have to repair the whole motor.

You must supply power to the blender’s motor pulley for it to spin.

A belt and pulley system is used to accomplish this.

A blender’s most frequent speed ranges from 50 to 100 RPMs (rotations per minute.)

On its quickest setting, a high-quality stand mixer spins at about 250 RPMs, or even higher for dough.

Electric motors are highly mechanical components that rely on electromagnets to function effectively.

The larger the magnet, the more energy is required to drive an electric motor, and also the louder it becomes.

Broken bases

A broken base also termed as a collar, seat, or container bottom might generate grinding or screeching sounds from your Magic Bullet blender.

If they are cracked or fractured, they may create this issue by preventing the jar from seating correctly on the motor base.

Overtightening the container base to the jar might cause deterioration in the long run.

Failed Couplers

Couplers, also defined as coupling, may fail, resulting in your Magic Bullet blender making a loud noise.

They are available in a range of materials and forms.

They are usually designed to fail if the blades are overwhelmed.

When a coupling begins to break, it makes a lot of noise, which typically indicates that one of the blades has broken off.

The blender’s coupling is positioned on the top of the base.

The fact that blenders are built of steel and feature heavy-duty blades contributes to their loudness.

This leaves them very rough, and the more time they’re utilized, the more they keep chipping away at the motor.

You’ll also note that blender motors are often stronger than countertop mixer motors, causing them to warm up much faster.

Overall, it’s important to operate your Magic Bullet blender sensibly and for the appropriate length of time so that it may last you several years instead of failing after just use once or twice.

Magic Bullet Blender Making Noise- Fixes

Magic Bullet blender making a loud noise, grinding sounds or screeching is not only annoying, but it may also signal that it needs to be repaired.

The blade, coupler, motor, and base have been narrowed down as the components that are most involved with making these sorts of loud sounds.

Read our guideline for DIY maintenance help once you’ve evaluated these items.

Replace the Blades

If the bearing has to be changed, replacing the complete blade assembly at the same moment could be a smart idea.

Meet Juice on Amazon has Magic Bullet blades which is the great replacement option.

The majority of blade components will simply detach from the jar’s base.

Remove the old blade assembly and replace it with the new one, reinstalling the seal and container base in the very same sequence that you took them apart.

Motor replacement

Magic Bullet blenders are made to blend quickly within a minute or two at most.

The motor may overheat and shut down as a result or even damage the motor.

Before starting this fix, disconnect the blender and remove the container from the base.

Loosen the screws keeping the plastic base cover in place by flipping the platform over.

Remove the nut that holds the interior plate in place using a screwdriver.

Take out its motor and fan with care, then disconnect the wires that link the motor with the blender base.

A yellow wire connecting the motor to the circuit panel will most likely need to be disconnected using a solder gun and then re-soldered to the replacement motor.

Insert the new motor in the opposite order after removing the old one.

Replace the Base

On your blender, this is a simple item to replace. Ensure the blender is turned off.

Remove the blade mechanism by unscrewing the jar base from the jar.

Insert the old blade system in the replacement container base, paying attention to the sequence in which the seal and blade parts are installed.

Here is our Step By Step Guide for Replacing Base and blade Gear

Install new Couplers

Ensure your blender is turned off before replacing the coupling.

Gently peel the coupling off the base with a tool, slowly twisting as you peel it off from various sides.

Before putting the new coupler Blendin, make sure there are no bits of metal from the previous one adhered to the spindle underneath it.

It’s possible to screw the new connection onto the spindle.

The frequent usage of the blender will harden it again.

5 Tricks to Reduce the Noise From Magic Bullet Blender

There are a few other things you can do to lessen the amount of noise your blender makes.

Make sure your blender is on a flat surface

Any item that is permitted to move will generate more noise.

The level of noise generated by your blender will be substantially reduced if it is flat and securely in position.

Put something under the blender.

Under your blender, use a silicon pad or other vibration dampening material.

Blenders appear to be so much louder than they actually are just because their vibrations are amplified by the board or countertop beneath them.

Consider a drumhead.

Quietening your blender might be as simple as cushioning the area underneath it.

You can use this rubber Shock Pad for your Magic Bullet.

Relocate your blender far from hard-surfaced walls

The echoing effect may considerably increase the apparent loudness produced by your blender.

Minimize the loudness by putting your blender farther from hard surfaces or damping sound dispersion with soft absorbing materials like foam or carpets.

Use a blend box

You may use an old cardboard container to make a noise-reducing mixing box, or you can construct a fancier one if you want.

A blending box is a container that you can place your blender inside or put over the top of. On the interior, it’s lined with sound-deadening material.

This doesn’t have to completely encase your Magic Bullet blender, but it should have at least three sides.

In numerous smoothie businesses, you may observe evidence of their usage.

Prepare your ingredients beforehand

 If your Magic bullet is making a loud noise, you can prepare the ingredients beforehand.

For instance, cut the fruits into small pieces and mix them in a bowl.

If you want to blend frozen fruits, take out them from the freezer the night beforehand and blend them in the next morning.

 

Related Articles:

Magic Bullet Blade Not Spinning

Can you Put Ice in Magic Bullet Blender?

Magic Bullet Leaking

Magic Bullet Smells Like Burning