How To Fix Maytag Commercial Washer lcsu Error Code?

Maytag Commercial Washer lcsu Error Code
( Disclaimer: As an Amazon Associate, we earn commissions from qualifying purchases at NO additional cost to the customer.)                                          

Every load needs a trustworthy clean, yet dependability varies depending on the business.

There is a Maytag Commercial Laundry washing machine built to match the definition of dependability.

Automatic load balancing with the help of Advanced Spin Technology makes Maytag washers remarkable.

One can configure the scalable multi-load cycles to suit the requirements.

These modern appliances, washing machines in this case, have the excellent advantage of displaying an error code to the user when a problem occurs, which is one of their many advantages.

In Maytag commercial washers, one of the error code that may occur is lcsu which represents the Default message indicating a fresh factory state.

What Does it Mean Error Code lcsu in Maytag Commercial Washers?

In Maytag washers, the error lcsu is observed.

The error lcsu basically represents that machine is refreshed and got the new state.

Any undesirable preferences, settings, or choices that one may have made will be removed.

The Maytag washers might got stuck due to glitches, or any other errors which include personal, systematic, and random errors.

In such conditions, there is a need to reset the washing machine.

By resetting the washers, all the parameters set to their initial value.

Thus, washing machine gets a new factory state.

Therefore, the error appears when Maytag washers need to get a new state for smooth performance.

Sources for Maytag Washer lcsu Error

Control Board

The machine’s control board, which is essential to its operation and is in charge of electricity supply, nearly all of the electrical components in a washing machine are driven by the control board.

So if the board isn’t working properly, then the washer may not be getting power during the rinse and drain cycle.

Because the control board is a key component, any problem with it might result in a variety of issues with the washers.

Failure of the washer and dryer’s working might be caused by component malfunction.

Therefore, for efficient functioning, the control board must be in complete working order.

Drain Pump

The drain feature of a washing machine drains the water from the tub during the spin cycle.

The washer pump pumps water from the bottom of the washer into the drain line.

The washer’s drain tube can overflow the tub since it loops to the top of the machine before going down to the drain.

The water leaves the drain at the bend in the hose.

Small objects or pieces of clothes may occasionally become lodged in the drain pump.

The washer’s difficulty to drain could be due to a clogged pump or pipe.

Small socks and other clothing items frequently make their way into the water drainage system and clog the pump or the pipe leading to it.

Due to this, there is a need to reset the settings.

Water Inlet Hoses

In connection with the water inlet hoses, there is another potential source.

Hoses for washing machines connect the front- or top-loading washer to the valve that manages the water flow to each wash cycle.

Due to their propensity for breaking, the two water supply lines—while necessary for the washing machine—are also a frequent source of water damage in houses.

Hoses leading to the water inlet could be kinked, pinched, or worn out.

It can be the result of bad water, mistakes made during installation, or worn rubber washer.

To avoid the lcsu error, make sure that the supply hoses are clean and functional.

Lid Switch Assembly

Washing machines include lid locks that secure the lid into place to prevent it from opening during a wash cycle.

While the washing machine is spinning, the lid switch ensures that the door is closed.

If the switch on the lid is broken, the washer won’t spin and thus error lcsu may appear.

In the event that the washer won’t spin but still agitates, the lid switch is likely damaged.

This interlocking feature serves as a safety precaution to eliminate any potential risks when operating the washing machine.

The lid switch system prevents the washer from spinning when the lid is open.

If the lid switch component fails, the washer won’t be able to work normally and hence lcsu error appears.

Miscellaneous Issues

A number of additional factors must be taken into account in addition to the sources described above if error lcsu is to be avoided.

For instance, issues with pressure switch hose could be brought on by an incorrect connection or poor maintenance.

For an uninterrupted working of washing machine, all other electrical connections must be examined.

There is always a potential that someone will act carelessly or make an accidental mistake using a tool.

The functionality of washers is disrupted by these problems, which could result in error lcsu.

Remedies to Fix Maytag Washer Error lcsu

To prevent or fix error lcsu, different possible solutions are listed below.


Restarting the device will prevent any malfunctions and will be the first step in minimizing the problem.

Push down firmly on the door close to the door lock to accomplish this.

Next, hold down the Power button while pressing it for at least three seconds.

In the event that the hot cycle is selected, hold the Power button down for a minimum of three seconds after cool-down has ended.

Turn on the washing after that.

If there isn’t any other issue with the washer, this should fix the error lcsu.

Though other options must be taken into consideration if the problem keeps popping up on the screen.

Wire Harness Connections

Verifying that all connections are functioning properly is the first and most important step.

Check the connection of the wire harness between the drain pump, pressure switch, and inlet valves (CCU).

Wire harness connections between the switch, central control, and pressure switch must be solidly fastened.

There is a potential that they could get loose, causing the error.

There is a good chance that these wire harness connections could become faulty.

It should be changed in this instance.

After replacement, check to make sure all connections are firmly fastened and free of any loose connections.

As a result, the problem will be resolved.

Drain Pump

An adequate amount of suction is required for a drain pump to be able to suck wastewater from the washing machine.

They frequently occupy space close to the back of the apparatus.

It permits water to move through a small pipe that joins to the drainage system.

These little, flexible pipes are known as “drain hoses.”

Remove the drain pump to check for any obstructions inside that might be keeping it from functioning properly in order to avoid drain pump issue.

Replace the drain pump if it still produces noises when draining even though there are no obstructions in its path.

This will help to prevent lcsu error.

Drain Pump Filter

Checking the drain pump filter is the next step if the restart approach does not work.

Look for and address any potential reasons of the “Clean filter” issue if the error code still appears.

Foreign objects could clog the system.

As a result, the filter has to be cleaned.

After that, the washer should be restarted.

If the door still won’t unlock, press and hold the Power button for at least three seconds.

If there is water within the machine, it might not be possible to open the door.

The Drain Pump Filter may need to be cleaned.

Door Latch Assembly

The door latch assembly will then need to be examined in case of error lcsu.

Check the assembly to see if everything is operating smoothly.

Turn off the water and disconnect the washer to do this.

Then, using a screw bit, the screws for the door latch must be tightened.

After that, take off the front bottom panel, reach inside, and repeatedly pull the emergency release.

After that, take off the top panel, unhook the wiring harness from the rear panel, and replug it.

Then move the door latch wiring harness.

After plugging the washer back in, turning on the water, and adding a load of laundry, the door latch locked loudly as normal, and the machine began to operate.

Pressure Hoses

The pressure switch hose needs to be in good shape and attached to the pressure switch properly.

To do this, it must first be determined that there is no syphon issue.

Remove the washer’s plug or cut the electricity.

The following action is to inspect all hoses for any potential leaks.

Then, confirm that all wiring harness connections are flawless.

After that, reconnect the power source and plug the washer in.

Check the pressure switch’s functionality once more.

Recheck the CCU operations lastly.

By following these, there is no need to reset the settings.




Related Articles:

Maytag Washer Error Code f9 e2

Maytag Washer Error f3 e1

Maytag Washer e01 f09