Many blenders are available on the market, but Blendjet offers some of the best brands available.
The products they offer are meant to provide users with excellent features while remaining simple and easy to use.
The Blendjet blender-owners tend to have a positive opinion about it, but some seem to have faced a problem with the device.
While using an electronic product, users encounter different problems.
There have been reports of Blendjet blenders flashing red.
Your Blendjet blender flashing red means the blender needs to be recharged.
If you notice solid red light on your Blendjet it simply means the blender blades gets blocked.
Our goal with today’s article is to find out the reason for the problem and fix the issue in detail.
Hence, without further ado, let’s get started!
Reason Behind Your Blendjet Blender Flashing Red?
There are two possible reasons why your Blendjet blender is flashing red.
BlendJet needs to be recharged
Your Blendjet blender flashing red light means your Blendjet has a lack of charging.
Your Blender needs to be recharged.
Blendjet takes up to 3 hours to charge fully.
But after usage, at a certain point, you need to recharge your blender.
Blendjet comes with technology that shows when you need to recharge your blender, so the red light is the indication for that.
Your blender’s blades are blocked
There is another reason for the Blendjet solid red light.
If your blender blades are locked, Blendjet indicates solid red light.
So, if your Blendjet is indicating solid red light, you should inspect the blades for any blockages.
These are the main reasons you face a flashing red light issue for your Blendjet blender.
If you take some simple steps, you can quickly get rid of the problem.
Here are the tricks and tips you should follow to solve the flashing red light problem for your Blendjet blender.
What to Do If Your Blendjet Blender Flashing Red?
Recharge Your Blendjet Blender Properly
You can fully charge your Blendjet in less than two hours, but it usually takes less time.
You should charge it before each use to get maximum performance.
The light turns red while you are charging your Blendjet.
Once you have fully charged it, the light will turn blue, and it is ready to use.
This is the simplest way to solve the flashing issue of your blender.
Use a high-quality charging cable for your Blendjet.
Blendjet can be charged over any USB port, whether from your phone, computer, or car.
Do not force the wrong USB cord into the charging point.
Make Sure the Power Cord is Working Well While Charging
Ensure that the power cord is in good condition.
Wires lying inside the protective cord sleeve tend to break if the cords are in a kinked position.
When examining the cord, look for serious bends or folds to determine if this is the problem.
If the cord is kinked, then the cause is probably the cord.
This is why your blender is not charged properly.
This can also be the reason for the flashing red issue.
You should check the instructions manuals for your blender.
A new cord should be easy to replace if the cord is easily removed from the inside of the base.
Welding is usually required, but the user manual will tell you what to do about the issue.
Fix Stuck Blade of Your Blendjet Blender
Recharge or shake your Blendjet, and/or turn it on upside down will fix your flashing red issue.
But if the stucked blade is the reason, you should take some initiative to solve that problem.
You can also replace the blade with a new one.
Avoid Overfilling Your Blender Container
It is important not to overfill your Blendjet container.
It may not be possible to spin properly if you fill it up too much at once.
Filling up your blender with different ingredients should not cause the still if overfilling is not the cause.
This will leave many items unblended and unmixed.
Liquids should be added first, followed by hard solids such as ice and frozen fruit to improve consistency and texture.
Rinse your Blendjet with water before use by pressing the power button.
You should always start by adding liquids like water, milk, or juice.
This will help you blend more easily.
You should cut your fruit or other ingredients into small pieces.
To blend at full speed, start your Blendjet upside down and let the blades reach their highest RPM, then flip it over right side up.
Your Blendjet blender can even be used to blend ice.
Note: It is important to blend with enough liquid inside first and not make the cubes too large.
The jar and base of the Blendjet may be damaged if they are filled with hot liquids over 120°F / 49°C.
Add liquid, shake your Blendjet a bit, or turn it upside down if they get stuck.
Keep Clean Your Blender Blades
When you fail to clean your blender blades after use properly, you can also have stuck blades.
To clean your Blendjet, put water in the container and add a drop of dish soap if you wish.
Run it one or more times until the blades are clean.
Once that’s done, dry it and keep it the next time you need it.
You should clean your blender each time you use it.
The lid and jar should not be put in the dishwasher.
Help from a professional
The Blendjet support team can assist you if you still can’t resolve the red light flashing issue.
They may ask you to send them the unit for further examination.
You should cooperate with them as much as you can.
The manufacturer can help you get a replacement if the device is still under warranty.
Alternatively, you may want to have a professional take a look at your blender.
The blender should be repaired if there is a consistent problem.
Extra Tips: Flashing red and blue lights indicate that your jar is not aligned properly.
Checking that all the components inside the blender are fitted correctly is the first thing you should do.
A good way to accomplish this is by reinstalling all components while securing each one in its place.
This will help you solve the issue smoothly.
Why is my portable blender not working?
Lack of charge or overload is the most common reason portable blenders don’t work.
Before using your blender, make sure it is properly charged.
On most blender models, a solid red light indicates that the blender is fully charged and ready to use.
Can I use a portable blender while charging?
You shouldn’t use your portable blender while it’s charging.
With the micro USB cable, you can charge the personal blender from your PC to a portable car charger.
This blender cannot be used while charging, so be sure to keep track of its battery life.
Why does my Blendjet blender get stuck?
If you overfill your blender, it may become stuck.
If you want to prevent lock-up, make sure you keep the liquid and solid items well balanced.
Wash your blender blades after each use and retain the right ratio of foods.
If these are not the issue, the motor may not be working properly.
Can you refrigerate Blendjet?
No. Unlike most blenders, the Blendjet cannot be refrigerated.
Due to its all-in-one design, we would not recommend it, as some of its internal components may be damaged.
A container that has been attached to a bottle cannot be detached without emptying its contents.
The Bottom Line
Blendjet blender flashing red light whenever you turn it on? Don’t worry!
It is quite a common issue that users face while using a Blendjet blender.
We do hope, you found all the instructions to troubleshoot the problem effectively.